How to install a two-door wardrobe
In recent years, with the popularity of home DIY, more and more people choose to install furniture by themselves. As a common household item, the installation process of a two-door wardrobe may seem simple, but the details determine success or failure. This article will combine the hot topics and hot content on the Internet in the past 10 days to give you a detailed introduction to the installation steps and precautions for a two-door wardrobe.
1. Preparations before installation
Before starting the installation, you need to make the following preparations:
| Tools/Materials | Quantity | Remarks |
|---|---|---|
| screwdriver | 1 handful | It is recommended to use an electric screwdriver, which is more efficient |
| hammer | 1 handful | Used to knock certain connecting parts |
| spirit level | 1 | Make sure the wardrobe is level after installation |
| wrench | 1 handful | for fastening bolts |
| wardrobe accessories bag | 1 set | Including screws, bolts, hinges, etc. |
2. Installation steps
1.Check accessories: After opening the package, first check whether all accessories are complete to avoid interruption due to missing parts during the installation process.
2.Assembling the wardrobe frame: According to the instructions, fix the side panels, back panel and top panel of the wardrobe with screws to ensure the frame is stable.
3.Install dividers and drawers: Install the partition according to the designed position and fix it with screws. When installing drawers, you need to pay attention to the symmetry of the slide rails.
4.Install wardrobe doors: Install the hinge on the cabinet door, then align the cabinet door with the cabinet body and fix it with screws. Adjust the hinges so the door opens and closes smoothly.
5.Adjust and check: Use a level to check whether the wardrobe is level, and adjust the legs or hinges to ensure the wardrobe is stable and the door opens and closes freely.
3. Common problems and solutions
| question | Reason | solution |
|---|---|---|
| Cabinet door does not close tightly | The hinge is not adjusted properly | Re-adjust hinge screws |
| Wardrobe shaking | The ground is uneven or the screws are not tightened | Adjust the cabinet legs or retighten the screws |
| Drawer slides poorly | Slide rails misaligned | Reinstall the slide rails |
4. Precautions after installation
1.Regular inspection: After using it for a period of time, check whether the screws are loose and tighten them in time.
2.avoid being overweight: The load-bearing capacity of the two-door wardrobe is limited, so avoid deformation caused by placing overweight items.
3.keep dry: The wardrobe should be placed in a dry and ventilated place to prevent moisture from causing deformation of the board.
5. References to hot topics
According to the hot topics on the Internet in the past 10 days, many users have shared their experiences and tips on DIY wardrobe installation on social media. The following are some hot topics:
| platform | hot topics | Discussion points |
|---|---|---|
| little red book | #wardrobe installation pit avoidance guide | How to avoid common mistakes during installation |
| Douyin | #Install wardrobe in 10 minutes | Quick installation tips sharing |
| Zhihu | Detailed explanation of the installation steps of two-door wardrobe | Detailed steps and tool recommendations |
Through the above steps and precautions, I believe you can successfully complete the installation of a two-door wardrobe. DIY can not only save costs, but also bring a sense of accomplishment. I wish you a smooth installation!
check the details
check the details
en
