What should I do if the heating floor is not hot?
With the arrival of winter, heating issues have become the focus of many families. Recently, there has been a lot of discussion on the Internet about whether the floor heating is hot or not. Especially in the northern region, users frequently report that the floor heating is not hot. This article will provide you with structured data and suggestions from three aspects: cause analysis, solutions and preventive measures.
1. Common causes of geothermal failure
According to hot topics and user feedback on the Internet in the past 10 days, the main reasons why the geothermal heat is not hot are as follows:
| Cause classification | Specific performance | Proportion (estimate) |
|---|---|---|
| clogged pipes | The water flow is not smooth and the area is not hot. | 35% |
| Not enough pressure | Overall temperature is low | 25% |
| gas accumulation | There is abnormal noise in the radiator or pipes | 20% |
| thermostat failure | Temperature control failure | 10% |
| Others | Installation issues or poor building insulation | 10% |
2. Solution
In response to the above problems, the following are effective solutions verified by users across the entire network:
| Question type | Solution steps | Things to note |
|---|---|---|
| clogged pipes | 1. Close the water inlet valve 2. Use professional cleaning agents to clean in cycles 3. Restore water supply after sewage discharge | It is recommended to have it professionally cleaned every 2-3 years |
| Not enough pressure | 1. Check the pressure gauge (should maintain 1.5-2Bar) 2. Pressurize through the water replenishment valve 3. Check for water leakage | Need to be vented after pressurization |
| gas accumulation | 1. Find the exhaust valve 2. Use a tool to slowly deflate the air until water comes out. 3. Close the valve and check the temperature | It is recommended to exhaust gas once a week |
| thermostat failure | 1. Replace the battery 2. Recalibrate the sensor 3. Contact after-sales maintenance | Test in advance before winter |
3. Preventive measures
According to the professional advice of heating companies and user experience, the following measures can reduce the situation of underfloor heating:
1.Annual maintenance: Before the heating season, have a professional inspect the system, including pipes, pumps, valves, and temperature control equipment.
2.keep the pressure down: Observe the pressure gauge regularly and replenish water in time when it is lower than 1Bar, but not exceed 3Bar.
3.fair use:
| daytime | Keep at 18-20℃ |
| night | Can be adjusted lower by 2-3℃ |
| When no one is around | Keep at 15°C to prevent freezing |
4.Enhance thermal insulation: Check the sealing of doors and windows, and laying special insulation film for floor heating can increase thermal efficiency by 5-8%.
4. Emergency handling
If the following occurs, please contact the heating company or property management company immediately:
• Burst pipes leaking water
• Continuous decrease in pressure cannot be maintained
• Multiple households experience lack of heat at the same time (possibly due to main pipe failure)
According to the latest statistics, 90% of heating problems are solved within 48 hours. It is recommended that users report for repairs through the official APP, as the average response time is 30% faster than over the phone.
Through the above structured analysis and solutions, we hope to help you effectively solve the problem of insufficient geothermal heat and spend the warm winter. If the problem persists, it is recommended to contact the local heating station to obtain personalized testing services.
check the details
check the details
en
